Blog - StocksAim

Ray Morgan Ray Morgan

0 Course Enrolled • 0 Course Completed

Biography

CIDQ IDFX높은통과율시험공부 & IDFX인증시험덤프

Itexamdump IDFX 최신 PDF 버전 시험 문제집을 무료로 Google Drive에서 다운로드하세요: https://drive.google.com/open?id=1MOMselt4r3R7Tst7m8_yqEoxGSjm8mp8

Itexamdump 에서CIDQ IDFX 덤프를 구매하시면 일년무료 업데이트서비스를 받을수 있습니다.일년무료 업데이트서비스란 구매일로부터 1년동안 구매한 덤프가 업데이트될때마다 구매시 사용한 메일주소로 가장 최신버전을 보내드리는것을 의미합니다. CIDQ IDFX덤프에는 가장 최신시험문제의 기출문제가 포함되어있어 높은 적주율을 자랑하고 있습니다.

Itexamdump의 도움을 받겠다고 하면 우리는 무조건 최선을 다하여 한번에 패스하도록 도와드릴 것입니다. 또한 일년무료 업뎃서비스를 제공합니다. 중요한 건 덤프가 갱신이 되면 또 갱신버전도 여러분 메일로 보내드립니다. 망설이지 마십시오. 우리를 선택하는 동시에 여러분은IDFX시험고민을 하시지 않으셔도 됩니다.빨리 우리덤프를 장바구니에 넣으시죠.

>> CIDQ IDFX높은 통과율 시험공부 <<

IDFX높은 통과율 시험공부 덤프 최신 업데이트버전

CIDQ인증IDFX시험을 패스하기가 어렵다고 하면 합습가이드를 선택하여 간단히 통과하실 수 잇습니다. 우리Itexamdump에서는 무조건 여러분을 위하여 관연 자료덤프 즉 문제와 답을 만들어낼 것입니다. 우리덤프로CIDQ인증IDFX시험준비를 잘하시면 100%CIDQ인증IDFX시험을 패스할 수 있습니다. Itexamdump덤프로 여러분은CIDQ인증IDFX시험을 패스는 물론 여러분의 귀증한 간도 절약하실 수 있습니다.

최신 Interior Design Certification IDFX 무료샘플문제 (Q113-Q118):

질문 # 113
What is the total length of ramp required for a rise of 1'-6" [45.72 cm]?

A. 12 feet [3.66 m]
B. 16 feet [4.88 m]
C. 18 feet [5.49 m]
D. 36 feet [10.97 m]

정답：C

설명：
The total length of a ramp is determined by its slope, which must comply with ADA accessibility standards.
The ADA requires a maximum slope of 1:12 for ramps, meaning for every 1 inch of rise, the ramp must extend 12 inches in length. A rise of 1'-6" is 18 inches (since 1 foot = 12 inches, 1'-6" = 12 + 6 = 18 inches).
Using the 1:12 ratio, the ramp length is 18 inches x 12 = 216 inches, or 216 ÷ 12 = 18 feet. Therefore, the total length required is 18 feet (5.49 m). Option A (12 feet) would result in a steeper slope (1:8), which is not ADA-compliant. Option B (16 feet) is also too short (slope of 1:10.67). Option D (36 feet) is excessive and not the minimum required.
Verified Answer from Official Source:
The correct answer is verified using NCIDQ IDFX content on accessibility standards.
Exact Extract:TheNCIDQ IDFX Reference Manualreferences ADA standards, stating, "For a ramp with a rise of 18 inches, the minimum length required at a 1:12 slope is 18 feet (216 inches), ensuring accessibility." The NCIDQ IDFX curriculum requires designers to apply ADA standards for ramps, with the 1:12 slope being the maximum allowable to ensure safe access for wheelchair users.
Objectives:
* Apply accessibility standards to ramp design (IDFX Objective: Codes and Standards).

질문 # 114
What floor tile type is the most suitable for a wet location such as showers or industrial kitchens?

A. Non-vitreous
B. Semivitreous
C. Impervious
D. Vitreous

정답：C

설명：
Floor tiles in wet locations, such as showers or industrial kitchens, must be resistant to water absorption to prevent damage, mold growth, and slip hazards. The NCIDQ IDFX Reference Manual and industry standards (e.g., from the American National Standards Institute [ANSI] and the Tile Council of North America
[TCNA]) classify ceramic tiles based on their water absorption rates, which determine their suitability for different environments.
* A. Vitreous: Vitreous tiles have a water absorption rate of 0.5% to 3%, making them moderately resistant to water. They are suitable for indoor areas with some moisture (e.g., bathrooms), but in wet locations like showers or industrial kitchens, where constant exposure to water occurs, vitreous tiles may still absorb enough water to cause issues over time.
* B. Impervious: Impervious tiles have a water absorption rate of less than 0.5%, making them highly resistant to water penetration. This makes them the most suitable for wet locations like showers and industrial kitchens, where they can withstand constant moisture, cleaning, and potential chemical exposure (e.g., in kitchens). Impervious tiles, such as porcelain, are also often specified for their durability and slip resistance when textured.
* C. Non-vitreous: Non-vitreous tiles have a water absorption rate greater than 7%, making them highly absorbent and unsuitable for wet locations. They are typically used in dry, decorative applications (e.g., wall tiles in non-wet areas).
* D. Semivitreous: Semivitreous tiles have a water absorption rate of 3% to 7%, making them less absorbent than non-vitreous tiles but still not ideal for wet locations. They may be used in areas with occasional moisture but are not suitable for constant water exposure.
The NCIDQ IDFX Reference Manual recommends impervious tiles for wet locations due to their low water absorption rate, ensuring durability and safety in environments like showers and industrial kitchens.
Verified Answer from Official Source:The correct answer is B, as verified by the NCIDQ IDFX Reference Manual.
Exact Extract:
From the NCIDQ IDFX Reference Manual (Chapter 7: Design Elements and Principles): "Impervious tiles, with a water absorption rate of less than 0.5%, are the most suitable for wet locations such as showers and industrial kitchens, as they resist water penetration and maintain durability." Explanation from Official Source:
The NCIDQ IDFX Reference Manual explains that impervious tiles are the best choice for wet locations because their low water absorption rate (less than 0.5%) prevents water damage, mold growth, and other issues associated with constant moisture. This makes them ideal for showers and industrial kitchens, where water exposure is frequent and significant.
Objectives:
* Understand the water absorption properties of different tile types.
* Select appropriate floor tiles for wet locations based on performance requirements.

질문 # 115
Hot spots from cove lighting are created when

A. The lamps are improperly ventilated
B. The light source is too close to the ceiling
C. The light transformer interrupts the lamp configuration
D. White paint is used to reflect the light

정답：B

설명：
Cove lighting is an indirect lighting technique where light sources are hidden in a recessed ledge or cove, typically along the perimeter of a ceiling, to create a soft, diffused glow. Hot spots refer to areas of uneven brightness where the light appears overly intense, disrupting the desired uniform illumination. The NCIDQ IDFX Reference Manual and lighting design standards (e.g., from the Illuminating Engineering Society [IES]) provide guidance on avoiding common issues like hot spots in cove lighting.
* A. The lamps are improperly ventilated: Improper ventilation can cause lamps to overheat, potentially leading to reduced lifespan or safety hazards, but it does not directly cause hot spots. Hot spots are a visual issue related to light distribution, not heat dissipation.
* B. White paint is used to reflect the light: White paint in a cove is often recommended because it reflects light evenly, helping to diffuse the illumination and reduce hot spots. Using a reflective surface like white paint is a standard practice in cove lighting design, nota cause of hot spots.
* C. The light source is too close to the ceiling: Hot spots occur when the light source (e.g., LED strip, fluorescent tube) is positioned too close to the ceiling surface, causing the light to reflect directly off the ceiling without proper diffusion. This creates bright spots where the light hits the ceiling most intensely, rather than a smooth, even glow. The IES recommends maintaining a minimum distance (typically 6-12 inches, depending on the fixture) between the light source and the ceiling to allow for proper light spread and diffusion, avoiding hot spots.
* D. The light transformer interrupts the lamp configuration: A transformer (or driver for LEDs) might cause issues with power supply or flickering, but it does not directly affect the distribution of light to create hot spots. This option is more related to electrical configuration than light placement.
The NCIDQ IDFX Reference Manual specifies that hot spots in cove lighting are caused by improper placement of the light source, particularly when it is too close to the ceiling, preventing even light distribution.
Verified Answer from Official Source:The correct answer is C, as verified by the NCIDQ IDFX Reference Manual.
Exact Extract:
From the NCIDQ IDFX Reference Manual (Chapter 8: Environmental Control Systems): "Hot spots in cove lighting are created when the light source is too close to the ceiling, causing uneven reflection and bright spots rather than a diffused glow." Explanation from Official Source:
The NCIDQ IDFX Reference Manual explains that the distance between the light source and the ceiling is critical in cove lighting design. When the light source is too close, the light reflects directly off the ceiling, creating hot spots instead of the desired even illumination. Proper spacing ensures the light can spread and diffuse, achieving a uniform effect.
Objectives:
* Understand the principles of cove lighting design in interior spaces.
* Identify common issues like hot spots and their causes in lighting applications.

질문 # 116
A designer has been asked to design a chair and table for a preschool. Which human factor is MOST important to consider?

A. Proxemics
B. Biometrics
C. Anthropometrics
D. Ergonomics

정답：C

설명：
Designing furniture for a preschool requires considering the physical dimensions and proportions of young children, which is the focus of anthropometrics-the study of human body measurements. Anthropometrics ensures that the chair and table are appropriately sized for preschool-aged children (e.g., seat height, table height) to promote comfort and safety. Biometrics (Option A) relates to biological identification (e.g., fingerprints), not furniture design. Proxemics (Option B) studies personal space and social distances, which is less critical for sizing furniture. Ergonomics (Option C) focuses on comfort and efficiency but is broader and less specific to sizing than anthropometrics, which is the primary concern for children's furniture.
Verified Answer from Official Source:
The correct answer is verified using NCIDQ IDFX content on human factors in design.
Exact Extract:TheNCIDQ IDFX Reference Manualstates, "Anthropometrics is the most important human factor when designing furniture for specific user groups, such as children, to ensure proper sizing and proportion." The NCIDQ IDFX curriculum emphasizes anthropometrics as a key consideration for designing furniture that fits the user's body, especially for specialized groups like children.
Objectives:
* Apply human factors to furniture design (IDFX Objective: Human Behavior and the Designed Environment).

질문 # 117
What is the MINIMUM clear width for an accessible door opening?

A. 30 inches [762 mm]
B. 34 inches [864 mm]
C. 36 inches [914 mm]
D. 32 inches [813 mm]

정답：D

설명：
The minimum clear width for an accessible door opening is defined by ADA standards to ensure that individuals using wheelchairs can pass through easily. The ADA requires a minimum clear width of 32 inches (813 mm) when the door is open at 90 degrees, measured between the face of the door and the opposite stop.
This width accommodates most wheelchairs and ensures accessibility. Option A (30 inches) is too narrow and does not meet ADA requirements. Options C (34 inches) and D (36 inches) exceed the minimum requirement, with 36 inches being a common recommendation for larger wheelchairs but not the minimum.
Verified Answer from Official Source:
The correct answer is verified using NCIDQ IDFX content on accessibility standards.
Exact Extract:TheNCIDQ IDFX Reference Manualreferences ADA standards, stating, "The minimum clear width for an accessible door opening is 32 inches (813 mm) to ensure wheelchair access." The NCIDQ IDFX curriculum requires designers to apply ADA standards for accessibility, with the 32-inch clear width being a fundamental requirement for door openings.
Objectives:
* Apply accessibility standards to door design (IDFX Objective: Codes and Standards).

질문 # 118
......

Itexamdump는 CIDQ인증관련덤프를 제공하는 최고의 업체입니다, 덤프들은 Itexamdump의 베터랑의 전문가들이 오랜 풍부한 경험과 IDFX지식으로 만들어낸 최고의 제품입니다. 그리고 우리는 온라인무료 서비스도 제공되어 제일 빠른 시간에 소통 상담이 가능합니다.

IDFX인증 시험덤프: https://www.itexamdump.com/IDFX.html

CIDQ 인증IDFX시험대비덤프에는 시험문제의 모든 예상문제와 시험유형이 포함되어있어 시험준비자료로서 가장 좋은 선택입니다, IDFX 덤프를 구매하시면 일년무료 업데이트 서비스를 받을수 있습니다.일년무료 업데이트 서비스란 구매일로 부터 1년동안 구매한 IDFX덤프가 업데이트될 때마다 구매시 사용한 메일주소로 가장 최신버전을 보내드리는것을 의미합니다, CIDQ IDFX높은 통과율 시험공부 편한 덤프공부로 멋진 IT전문가의 꿈을 이루세요, 저희가 알아본 데 의하면 많은it인사들이CIDQ인증IDFX시험을 위하여 많은 시간을 투자하고 잇다고 합니다.하지만 특별한 학습 반 혹은 인터넷강이 같은건 선택하지 않으셨습니다.때문에 패스는 아주 어렵습니다.보통은 한번에 패스하시는 분들이 적습니다.우리 Itexamdump에서는 아주 믿을만한 학습가이드를 제공합니다.우리 Itexamdump에는CIDQ인증IDFX테스트버전과CIDQ인증IDFX문제와 답 두 가지 버전이 있습니다.우리는 여러분의CIDQ인증IDFX시험을 위한 최고의 문제와 답 제공은 물론 여러분이 원하는 모든 it인증시험자료들을 선사할 수 있습니다, 만약 여러분은CIDQ IDFX인증시험취득으로 이 치열한 IT업계경쟁 속에서 자기만의 자리를 잡고, 스펙을 쌓고, 전문적인 지식을 높이고 싶으십니까?

어느새 눈가에 눈물이 그렁그렁하게 맺힌 연희가 고개를 가로저었다, 바짝 긴장해서 화면을 본 설의 눈매가 부드러워졌다.곧 도착합니다.성윤에게서 온 짧은 메시지였다, CIDQ 인증IDFX시험대비덤프에는 시험문제의 모든 예상문제와 시험유형이 포함되어있어 시험준비자료로서 가장 좋은 선택입니다.

도비 CIDQ IDFX 시험

IDFX 덤프를 구매하시면 일년무료 업데이트 서비스를 받을수 있습니다.일년무료 업데이트 서비스란 구매일로 부터 1년동안 구매한 IDFX덤프가 업데이트될 때마다 구매시 사용한 메일주소로 가장 최신버전을 보내드리는것을 의미합니다.

편한 덤프공부로 멋진 IT전문가의 꿈을 이루세요, 저희가 알아본 데 의하면 많은it인사들이CIDQ인증IDFX시험을 위하여 많은 시간을 투자하고 잇다고 합니다.하지만 특별한 학습 반 혹은 인터넷강이 같은건 선택하지 않으셨습니다.때문에 패스는 아주 어렵습니다.보통은 한번에 패스하시는 분들이 적습니다.우리 Itexamdump에서는 아주 믿을만한 학습가이드를 제공합니다.우리 Itexamdump에는CIDQ인증IDFX테스트버전과CIDQ인증IDFX문제와 답 두 가지 버전이 있습니다.우리는 여러분의CIDQ인증IDFX시험을 위한 최고의 문제와 답 제공은 물론 여러분이 원하는 모든 it인증시험자료들을 선사할 수 있습니다.

만약 여러분은CIDQ IDFX인증시험취득으로 이 치열한 IT업계경쟁 속에서 자기만의 자리를 잡고, 스펙을 쌓고, 전문적인 지식을 높이고 싶으십니까?

Itexamdump IDFX 최신 PDF 버전 시험 문제집을 무료로 Google Drive에서 다운로드하세요: https://drive.google.com/open?id=1MOMselt4r3R7Tst7m8_yqEoxGSjm8mp8